| Moderated by: chrisbet, | Page: 1 2 3   |
|
|||||||
| Replacement lens focus ring grips - Page 1 | |
| Rate Topic |
| Author | Post |
|---|
| Posted: Sun Feb 16th, 2020 07:56 |
|
1st Post |
chrisbet
|
Any idea where I might get a new rubber grip for the 105 2.8 ? Fleabay has none, neither does nikon usa. Internet search throws up nothing for this lens! I have emailed Nikon UK Spares - lets hope they can help!
____________________ If it is broken it was probably me .... |
||||||||
|
| |||||||||
| Posted: Sun Feb 16th, 2020 11:34 |
|
2nd Post |
Eric
|
chrisbet wrote:Any idea where I might get a new rubber grip for the 105 2.8 ? You might have better luck trying a Nikon repair company like Fixation https://www.fixationuk.com or ACS https://advancedcameraservices.co.uk
____________________ Eric |
||||||||
|
| |||||||||
| Posted: Sun Feb 16th, 2020 13:25 |
|
3rd Post |
jk
|
Like Eric says I doubt Nikon will be much help as this is an item that they wont carry spares for but have go obtain them from Japan. Try contacting ACS (01953 889324) or FixationUK (020 7582 3294) for the part but you will need to provide lens serial number.
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
||||||||
|
| |||||||||
| Posted: Sun Feb 16th, 2020 15:55 |
|
4th Post |
GeoffR
|
jk wrote:Like Eric says I doubt Nikon will be much help as this is an item that they wont carry spares for but have go obtain them from Japan. Fortunately you would be wrong, contact Nikon at spareparts.uk@nikon.com and they will be more than happy to supply the required part/s I have replaced the zoom ring grip on a 24-70 f2.8 and a 16-85 f3.5-5.6. The service is excellent and quick.
|
||||||||
|
| |||||||||
| Posted: Sun Feb 16th, 2020 16:32 |
|
5th Post |
chrisbet
|
Thanks Geoff, I have done - let's see what they say.
____________________ If it is broken it was probably me .... |
||||||||
|
| |||||||||
| Posted: Mon Feb 17th, 2020 04:35 |
|
6th Post |
jk
|
Geoff those are current or recent lenses. Chris' lens is 30 years old. Manufacturers are/(were, rules may have changed) only obliged to keep spares for products up to 10 years old. This is why there was little fuss when Nikon moved to AiS lenses there were no aperture rings for the pre-Ai lenses but some of us accepted it and modified the aperture ring by filing it! Hope I am wrong and that Nikon UK can supply Chris' rubber ring for his lens.
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
||||||||
|
| |||||||||
| Posted: Mon Feb 17th, 2020 10:39 |
|
7th Post |
chrisbet
|
It may be old but the lens (at least its UV/IR version) is in current production!! The lens turned up today and is nowhere as bad looking as the images online made it out to be - a good exterior clean and it is presentable. As far as image quality goes, here is a close up taken with it - the lens actually goes down to 1: 0.88 with the extension tubes , but this was taken at 1:2.  The focus ring is smooth to turn but a bit "heavy", maybe the helicoid grease has thickened / dried out?
____________________ If it is broken it was probably me .... |
||||||||
|
| |||||||||
| Posted: Mon Feb 17th, 2020 13:48 |
|
8th Post |
GeoffR
|
jk wrote:Geoff those are current or recent lenses. Chris' lens is 30 years old. Both lenses are relatively recent though the 24-70 f2.8 has been replaced by the 24-70 f2.8 VR. I would still try Nikon first if it is only the rubber covering, if the focusing action is stiff that is another matter.
|
||||||||
|
| |||||||||
| Posted: Mon Feb 17th, 2020 15:02 |
|
9th Post |
Robert
|
Chris, get it serviced by ACS, as Eric mentions above, they have serviced several lenses and cameras for me, ring and ask for David he will give good advice. The lens should be smooth and buttery to focus. When they serviced my 300mm f/2.8 Ais, it came back a dream to use, I could (and still can) fine focus by brushing the the focus ring with back of my little finger. It's not expensive and if they have one they will probably put a new rubber grip on as part of the service.
____________________ Robert. |
||||||||
|
| |||||||||
| Posted: Mon Feb 17th, 2020 15:28 |
|
10th Post |
chrisbet
|
I have dropped both ACS and Fixation a line ... ...in the meantime I removed the old split ring, clean all the goo off of it, joined the split on the back with tape & superglued the join. Slid it back on the lens and gently abraded the old hard surface with fine carbide paper... it will do until I get something to replace it. 
____________________ If it is broken it was probably me .... |
||||||||
|
| |||||||||
| This is topic ID = 1794 Current time is 08:27 | Page: 1 2 3 | |
| Nikon DSLR Forums > Camera and Lens Forums > Lenses > Replacement lens focus ring grips | Top | |
Users viewing this topic |
||
Current theme is Modern editor
| A small amount of member data is captured and held in an attempt to reduce spammers and to manage users. This site also uses cookies to ensure ease of use. In order to comply with new DPR regulations you are required to agree/disagree with this process. If you do not agree then please email the Admins using info@nikondslr.uk Thank you. |
Hosted by Octarine Services
UltraBB 1.173 Copyright © 2008-2025 Data 1 Systems
Page processed in 0.0601 seconds (66% database + 34% PHP). 84 queries executed.
UltraBB 1.173 Copyright © 2008-2025 Data 1 Systems
Page processed in 0.0601 seconds (66% database + 34% PHP). 84 queries executed.